Daewoo Nexia

since 1994 of release

Repair and car operation


Deu Neksiya
+ Maintenance instruction
+ Maintenance
+ Engine
+ 3. Engine (two top camshafts)
+ cooling System
+ Toplevnaya and exhaust systems
+ Electric chain
+ 7. Ignition system
+ 8. Electronic control unit and sensors
+ Transmission
+ 10. Five-speed transmission and main RPO MM5 broadcast
+ 11. Automatic Transmission
+ Steering
+ Running gear
- 14. Forward suspension bracket
   14.2. General description
   14.3. Check of size of forces of a friction in a suspension bracket
   14.4. Check of a condition of bearing support and spherical hinges
   14.5. Stabilizer
   14.6. A rack assembled with a bearing support
   14.7. Bottom lever
   14.8. Spherical hinge
   14.9. Nave and wheel bearing
   14.10. Top support
   14.11. Springs
   14.12. Shock-absorber
   14.13. Plugs of hinges of the bottom lever
+ 15. Drive of forward wheels
+ 16. Back suspension bracket
+ Brake system
+ Body
+ Heating, ventilation
+ Electric equipment


8128da4b



14.2. General description
GENERAL INFORMATION

Device of a forward suspension bracket

1. SPRING CLAMP
2. KORONCHATY NUT
3. BOLT
4. COLLAR OF FASTENING OF THE BOTTOM LEVER
5. IT IS FREE
6. SPHERICAL HINGE
7. IT IS FREE
8. BOLT
9. WASHER
10. RUBBER PLUG
11. BOLT
12. WASHER
13. BOTTOM LEVER
14. PLUG OF THE BACK SUPPORT OF THE LEVER
15. PLUG OF THE FORWARD SUPPORT OF THE LEVER
16. WASHER
17. NUT
18. RUBBER PLUG
19. WASHER
20. RASPORNY PLUG
21. WASHER
22. RUBBER PLUG
23. IT IS FREE
24. RUBBER PLUG
25. COLLAR
26. RUBBER PLUG OF THE STABILIZER
27. STABILIZER
28. RUBBER PLUG
29. WASHER
30. NUT
31. SCREW COVER OF THE RACK 		32. TELESCOPIC SHOCK-ABSORBER
33. THE RACK WITH THE BEARING SUPPORT (THE ROTARY FIST)
34. WASHER PERSISTENT
35. NUT OF THE ROD OF THE SHOCK-ABSORBER
36. PROTECTIVE COVER OF THE TOP SUPPORT
37. NUT
38. WASHER
39. TOP (BEARING) SUPPORT OF THE RACK
40. THE TARELCHATY WASHER (WITH THE EDGE UNBENT UP)
41. SUPPORT (PLASTIC)
42. PROTECTIVE CASING OF THE RACK
43. TOP LAYING OF THE SPRING
44. SPRING
45. COMPRESSION BUFFER
46. BOTTOM LAYING OF THE SPRING
47. GUARD OF THE DISK BRAKE
48. SPRING RING
49. WHEEL BEARING
50. SPRING RING
51. NAVE
52. BRAKE DISK
53. WASHER
54. ШПЛИНТ
55. SEMI-AXIS NUTS
56. ADJUSTING SCREW
57. BRACKET OF THE DISK BRAKE
58. SCREW
59. WASHER

On the car the independent lever and telescopic suspension bracket with spring elastic elements is established. The suspension bracket consists of the bottom levers, telescopic racks with shock-absorbers, springs, the top support and the stabilizer. In hinges of the bottom levers rubber plugs are used. The top support of a telescopic rack is supplied rubber to a damper with a yushchy element and the persistent bearing for possibility of turn of forward wheels. Telescopic racks bear bearing support of wheels which sharnirno are connected with the bottom levers of a suspension bracket spherical hinges. Shafts of spherical fingers are inserted into openings of bearing support and fixed by nuts. Cases of spherical hinges приклепаны to the bottom levers. At carrying out servicing of a suspension bracket the final inhaling of fixing bolts of support of the bottom lever and стабилизато ра should be made only in such provision of details of a suspension bracket which corresponds to static loading of the car. The suspension bracket occupies static situation at an opiraniye of the equipped car on an equal and horizontal platform.